How much do I need?
Interested in planning for your project? Check out the convenient and easy to use Coatings calculator below to get an estimate of how many buckets you may need for your project!
Interested in planning for your project? Check out the convenient and easy to use Coatings calculator below to get an estimate of how many buckets you may need for your project!
Compare the scale of your project with these common items.
Average Size: 8.5 ft. x 32 ft.
Square Feet: 272
Average Size: 18 ft. x 20 ft.
Square Feet: 360
Average Size: 14 ft. x 14 ft.
Square Feet: 196
Please note that these calculations are estimates and your required amount could vary.
Roof Mate™ Top Coat forms a waterproof elastomeric seal, uniformly covering the substrate to form a monolithic coating that helps provide protection from normal weathering, aging, and ultraviolet exposure
Specifications (All Dimensions are Nominal) | |
---|---|
Solids by Weight | 66% (±2) [ASTM D1644] |
Solids by Volume | 53% (±2) [ASTM D2697] |
Tensile Strength | 284 psi (±20) (1.95 MPa) @ 75°F (24°C) [ASTM D2370] |
Elongation | 258% (±30) @ 75°F (24°C) [ASTM D2370] |
Hardness | 55-65 Shore A [ASTM D2240] |
Permeance | 5.7 U.S. perms [ASTM D1653] |
Temperature Limits for Service Conditions | 30°F to 180°F (-35°C to 82°C) |
Colors | Evergreen, Gray, Light Gray, Light Tan, Patina Green, Slate Blue, Tan, Teal Green, Terra Cotta, White |
VOC | <50 g/L |
High Temperature Stability | No age hardening up to 250°F (121°C) |
Resistance to Wind Driven Rain | 0.3% moisture result [Federal Specification TTC-555B] |
Application Temperature (Air, Surface) | Air: 50°F (10°C) and rising; Surface: 50°F – 110°F (10°C – 43°C) |
Drying Time (70°F, 50% RH) | 3hrs @ 70°F (21°C), 50% R.H. |
Weight/Gallon | 11.8 lb. (±0.2) (1.41 kg/l) [ASTM D1475] |
Thermal Emittance | Initial: 0.92; 3 yr: 0.90 |
Solids by Weight: 66% (±2) [ASTM D1644] | |
Solids by Volume: 53% (±2) [ASTM D2697] | |
Tensile Strength: 284 psi (±20) (1.95 MPa) @ 75°F (24°C) [ASTM D2370] | |
Elongation: 258% (±30) @ 75°F (24°C) [ASTM D2370] | |
Hardness: 55-65 Shore A [ASTM D2240] | |
Permeance: 5.7 U.S. perms [ASTM D1653] | |
Temperature Limits for Service Conditions: 30°F to 180°F (-35°C to 82°C) | |
Colors: Evergreen, Gray, Light Gray, Light Tan, Patina Green, Slate Blue, Tan, Teal Green, Terra Cotta, White | |
VOC: <50 g/L | |
High Temperature Stability: No age hardening up to 250°F (121°C) | |
Resistance to Wind Driven Rain: 0.3% moisture result [Federal Specification TTC-555B] | |
Application Temperature (Air, Surface): Air: 50°F (10°C) and rising; Surface: 50°F – 110°F (10°C – 43°C) | |
Drying Time (70°F, 50% RH): 3hrs @ 70°F (21°C), 50% R.H. | |
Weight/Gallon: 11.8 lb. (±0.2) (1.41 kg/l) [ASTM D1475] | |
Thermal Emittance: Initial: 0.92; 3 yr: 0.90 |
Codes | |
---|---|
FBC | State of Florida approved |
FM | FM approved |
Miami-Dade County | Miami-Dade County Product Control approved |
FBC: State of Florida approved | |
FM: FM approved | |
Miami-Dade County: Miami-Dade County Product Control approved |
Testing Methods & Applicable Standards | |
---|---|
ASTM D6083 | Meets or exceeds minimum requirements |
ASTM D6083: Meets or exceeds minimum requirements |
Energy Rating | |
---|---|
CRRC | CRRC rated |
ENERGY STAR® Certified (U.S. only) | Yes |
USGBC LEED Gold | Contributes |
Title 24 (California Energy Commission) | Yes |
CRRC: CRRC rated | |
ENERGY STAR® Certified (U.S. only): Yes | |
USGBC LEED Gold: Contributes | |
Title 24 (California Energy Commission): Yes |
Shipping and Packaging | |
---|---|
Pail | 5-gallon (18.9 liter) |
Bucket | 1-gallon (3.8 liter) |
Drum | 55-gallon (208 liter) |
Shelf Life | 18 months 50°F – 90°F (10°C – 32°C) |
Pail: 5-gallon (18.9 liter) | |
Bucket: 1-gallon (3.8 liter) | |
Drum: 55-gallon (208 liter) | |
Shelf Life: 18 months 50°F – 90°F (10°C – 32°C) |