How much do I need?
Interested in planning for your project? Check out the convenient and easy to use Coatings calculator below to get an estimate of how many buckets you may need for your project!
Interested in planning for your project? Check out the convenient and easy to use Coatings calculator below to get an estimate of how many buckets you may need for your project!
Compare the scale of your project with these common items.
Average Size: 8.5 ft. x 32 ft.
Square Feet: 272
Average Size: 18 ft. x 20 ft.
Square Feet: 360
Average Size: 14 ft. x 14 ft.
Square Feet: 196
Please note that these calculations are estimates and your required amount could vary.
HydroStop® Foundation Coat is the foundation coat of the HydroStop® System, used in conjunction with HydroStop® Finish Coat and HydroStop® Fabric. It is a water-based acrylic base coat that is tinted green to make it distinguishable from HydroStop® Finish Coat in order to easily spot substrates not yet covered.
Specifications (All Dimensions are Nominal) | |
---|---|
Accelerated Weathering | 1,000 hrs: Pass, no change |
Full Cure | 7 Days |
Low-Temperature Flexibility | Pass, -15°F after 1,000 hrs Xenon |
Permeance | 4.9 |
Solids by Volume | 52% (±2) |
Solids by Weight | 66% (±2) |
VOC | <50 g/L |
Tear Resistance | 82 |
Tensile Strength | 173 psi |
Accelerated Weathering: 1,000 hrs: Pass, no change | |
Full Cure: 7 Days | |
Low-Temperature Flexibility: Pass, -15°F after 1,000 hrs Xenon | |
Permeance: 4.9 | |
Solids by Volume: 52% (±2) | |
Solids by Weight: 66% (±2) | |
VOC: <50 g/L | |
Tear Resistance: 82 | |
Tensile Strength: 173 psi |
Codes | |
---|---|
FBC | State of Florida Approved |
FM | FM Approved |
Miami-Dade County | Miami-Dade County Product Control Approved |
TDI | Meets the requirements of the Texas Department of Insurance |
FBC: State of Florida Approved | |
FM: FM Approved | |
Miami-Dade County: Miami-Dade County Product Control Approved | |
TDI: Meets the requirements of the Texas Department of Insurance |
Testing Methods & Applicable Standards | |
---|---|
ASTM D6083 | Meets or Exceeds Requirements |
UL | UL Listed to ANSI/UL 790 Class A. Refer to UL Online Certification Directory for actual assemblies. |
ASTM D6083: Meets or Exceeds Requirements | |
UL: UL Listed to ANSI/UL 790 Class A. Refer to UL Online Certification Directory for actual assemblies. |
Shipping and Packaging | |
---|---|
Bucket | 2-gallon (7.6 liter) |
Drum | 55-gallon (208 liter) |
Pail | 5-gallon (18.9 liter) |
Shelf Life | 18 months 50°F – 90°F (10°C – 32°C) |
Bucket: 2-gallon (7.6 liter) | |
Drum: 55-gallon (208 liter) | |
Pail: 5-gallon (18.9 liter) | |
Shelf Life: 18 months 50°F – 90°F (10°C – 32°C) |